Researchers reveal effects of defects on electron emission property of graphene electrodes


Schematic diagram of a thermionic energy converter. Credit: Zhao Ming

After studying the effects of irradiation defects on the work function of graphene electrodes in thermionic energy converters (TECs), a research team found that the generation of defects in graphene through irradiation would increase the work function and reduce the electron emission capacity. This results in reduced power output and conversion efficiency of TECs.

The research team, led by Prof. Yu Jie and Associate Prof. Jiang Zhizhong from the Hefei Institutes of Physical Science of the Chinese Academy of Sciences, has published their findings in Applied Surface Science.

Graphene has enormous application potential as an electrode coating material for TECs of the microreactor, which can significantly improve the electron emission ability of electrode.

Electrode materials will be exposed to irradiation by high-energy particles during TECs use. Previous studies have shown that the types of defects induced by irradiation in graphene are mainly Stone-Wales defects, doping defects, and carbon vacancies. The appearance of defects will affect the adsorption properties of alkali and alkaline earth metals on the graphene surface in the electrode gap, and then change the electron emission properties of the graphene coating.

In this study, the researchers analyzed the internal influence mechanism of defects on graphene properties. They studied the adsorption and migration behaviors of alkali and alkaline earth metals on the surface of defective graphene at the atomic scale by utilizing the DFT calculations.

Researchers reveal effects of defects on electron emission property of graphene electrodes
Migration behavior of alkali and alkaline earth metal atoms on pristine and oxygen-containing defective graphene surfaces. Credit: Zhao Ming

“The defect sites act as traps to trap metal adatoms,” explained Zhao Ming, a member of the team. “The metal diffusion near the Stone-Wales defect and carbon vacancy defect was severely hindered. The metal migration barrier on the graphene surface doped with boron (B) or oxygen (O) also increased slightly.”

And more notably, it turned out that the work functions of graphene with Stone-Wales defect, carbon vacancy defect, and dopants were significantly increased, which was mainly attributed to the decrease of dipole formation probability and the increase of metal cohesive energy.

These fundamental findings provide theoretical guidance for the application of graphene-coated materials in TECs.

More information:
Ming Zhao et al, First-principles study of adsorption and migration of alkali and alkaline earth metals (Rb, Cs, and Ba) on graphene, Applied Surface Science (2022). DOI: 10.1016/j.apsusc.2022.155505

Provided by
Chinese Academy of Sciences

Researchers reveal effects of defects on electron emission property of graphene electrodes (2022, November 23)
retrieved 23 November 2022

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.



Read original article here

Denial of responsibility! Samachar Central is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – The content will be deleted within 24 hours.

Leave a comment